Men's MACH4.1FINA

Op voorraad
SKU
19010
€ 499,95
  • Verzonden op dezelfde dag
  • 99% size gegarandeerd
  • Gratis verzending vanaf €70,-*
  • Kwaliteit products

FINA goedgekeurd MACH4.1

Met dit triathlonwetsuit dat goedgekeurd is door de FINA en daardoor toegestaan voor alle nationale en internationale wedstrijden steven je af op een nieuw persoonlijk record! De MACH4.1 is een wetsuit met bijzondere details, die jou helpen om je snelste tijd ooit neer te zetten. Bovendien heeft dit wetsuit een mooie, sportieve look. En het zit ‘gewoon lekker’.

FINA approved Specificaties:

  • 1.0mm superstretch onder de armen
  • 1.0mm arms construction
  • 5mm 48Cell AirfloatTM  Stabiliteits panels
  • Super licht 44Cell HBF-Limestone neoprene
  • GlideSkinTM surface coating
  • Unique nek sluiting
  • 2.5mm AquaGripTM panels
  • YKK stainless steel bottom-up runner zipper

Features

FLEXIBLE 1.0MM UNDER ARMS & 1.0MM ARMS AND SHOULDERS

FLEXIBLE 1.0MM UNDER ARMS & 1.0MM ARMS AND SHOULDERS

Ultra-thin 1.0mm superFlex™ neoprene reinforced with an UltraFlex lining under arms and 1.0mm HBF-Limestone neoprene for the arms and shoulders construction gives the swimmer a 360° rotation of the arm with little resistance, allowing the swimmer to reach further with less effort. This benefit is multiplied as it reduces upper body fatigue over longer distances.

STABILITY PANELS: 5MM

STABILITY PANELS: 5MM

Made from highly buoyant Airfloat™ neoprene, these stability panels help you adopt the ideal swimming position in the water and maintain it.

UNIQUE NECK CLOSURE

The velcro closure on the rear is reversed so in the event the suit is closed incorrectly, only the soft material touches the skin.

RECOVERY PHASE UPPER CHEST PANEL 2.5MM

RECOVERY PHASE UPPER CHEST PANEL 2.5MM

The shape of this panel allows extra space and freedom of movement to the arm during the recovery phase of the stroke.
   



YKK ZIPPER

The world’s #1 zipper brand is utilised with a stainless steel runner. The zipper runs in a bottom-up configuration.

BACK LEG PANEL: 3.5MM

With a thickness of 3.5mm, this panel makes it possible to achieve a perfect water position. If it were thicker, it would cause a hollow back and if it were thinner it would cause too low a position in the water.